ufion.blogg.se - Shuttle xpc box cannot windows drive

optional: VGA / 15-pin D-Sub (supports analog video).

The PC features the following video outputs: The features of the integrated Intel HD graphics function depend on the processor type used. Supports two unbuffered DIMM modules (no ECC)Integrated Graphics 16 GB per DIMM, maximum total size of 32 GB Processor cooling with heat-pipe technology and two fans (6cm)Memory support 2x SO-DIMM slot with 204 pins

Please refer to the support list for detailed processor support information at heat-pipe cooling

The processor integrates PCI-Express, memory controller and the graphics engine on the same die (performance features depending on processor type) Not compatible with Intel Xeon E3 V5 processors with Socket LGA1151 and processors with the older Socket LGA 1150.ĭoes not support the unlock-function of Intel K-Series processors. Maximum supported processor power consumption (TDP) = 65WĬodename "Skylake", 14nm process technology, up to 8 MB of 元 cache Intel Core i7 / i5 / i3, Pentium and Celeron processors Socket LGA 1151 (H4) supports the sixth generation of Note: This system can also be powered by a power adapter with an output voltage of 12V DC.Processor support.DC Connector: 5.5 / 2.5mm (outer/inner diameter).AC Connector with protective-earth contacts, cable length: 1.7m.Supports power on after power failure Power Adapter Supports Unified Extensible Firmware Interface (UEFI) Supports hardware monitoring and watch dog functionality Mainboard FH110V, Mini-ITX form factor 17 x 17 cm, 8 layer designĬhipset: Intel® H110 Chipset (Intel® GL82H110 PCH, Codename "Sunrise Point")ĪMI BIOS in 8 Mbit EEPROM with SPI interfaceĪll capacitors are high quality solid capacitors It is compatible with Windows 7 / 8.1 / 10 and Linux - 64-bit.Mainboard / Chipset / BIOS This system comes without operating system. For a possible third 2.5" drive also a Y power cable is required. Important note: This system is ready for one 2.5" drive (SSD or hard disk) and one DVD/Blu-ray drive in slimline format to be installed.įor further 2.5" drives, additional SATA cables and screws are required. 1x combo connector (SATA and power) for an optical slimline drive (DVD or Blu-ray).2x Power cable for 2.5" drives (5 Volt ).The system includes the following pre-installed cables:

12.7 mm height 3) lower 2.5" bay supports one 2.5" drive with max. 12.7 mm height - this bay can alternatively be used for a 2.5" drive 2) upper 2.5" bay supports one 2.5" drive with max. This system features three drive bays: 1) supports one optical drive (ODD) in 5.25" slimline format with max. Operation position horizontal or even vertical with the optional stand PS01Storage Bays Hole for Kensington Lock at the back panel Open front - without covers for optical drive and front panel connectors